Pular para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 43 guias que incluem este passo.

Inglês
Japonês
Passo 2
Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center. Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle. Run the tool up along the left side of the display.
  • Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center.

  • Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle.

  • Run the tool up along the left side of the display.

ツールをピザカッターを使うように隙間の上を滑らせます。この方法で真ん中に付けられた泡状の接着剤を切り込みます。

車輪部で接着剤を切り込む際は、必ずハンドルを押しながら作業を進めてください。もし引いた場合、車輪部とハンドルが外れる可能性があります。

左側全ての上にツールを滑らせます。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.