Skip to main content

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 43 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 1

Step 1
Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear case. The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage. The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage.
  • Starting on the left of the display, near the power button, insert the iMac Opening Tool into the gap between the glass panel and the rear case.

  • The hub on the iMac Opening Tool will keep you from pushing the wheel in too far. If using a different tool, insert no more than 3/8" (9.5 mm) into the display. You risk severing antenna cables and causing serious damage.

ディスプレイの左側、つまり電源ボタンに近い方から始めます。iMacオープニングツールをガラス面とケースの側面の間に差し込みます。

iMacオープニングツールのハブ(車輪の中心部)は、ホイールをあまりにも押しすぎないようにします。 別の工具を使用する場合は、ディスプレイに3/8インチ(9.5 mm)を超えて挿入しないでください。アンテナケーブルを切断して重大な損傷を引き起こす危険性があります。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.