Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Inglês
Japonês
Passo 5
Gently lift the metal plate off of the drive assembly (shown in the first picture). Be careful not to sever the red wire or the white ribbon cable still attached to the two halves of the drive assembly. Then flip the two halves of the drive assembly upside down as shown in the third picture.
  • Gently lift the metal plate off of the drive assembly (shown in the first picture).

  • Be careful not to sever the red wire or the white ribbon cable still attached to the two halves of the drive assembly.

  • Then flip the two halves of the drive assembly upside down as shown in the third picture.

最初の画像のように、ドライブアセンブリからメタルプレートをゆっくりと持ち上げます。

2つのドライブアセンブリに取り付けられている赤いワイヤーや白いリボンケーブルを切断しないように注意してください。

次に、3番目の画像のように、ドライブアセンブリの2つの部分を上下逆にします。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.