Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Inglês
Espanhol

Traduzindo o passo 1

Passo 1
Locate the Bluetooth module cover on the bottom of the laptop Loosen the M2.0×5.0 captive screw and remove the cover by by lifting it straight up The Bluetooth module is connected to the laptop via a small cable with very fine wires - take care not to damage the cable when you pull the module out of the case.
  • Locate the Bluetooth module cover on the bottom of the laptop

  • Loosen the M2.0×5.0 captive screw and remove the cover by by lifting it straight up

  • The Bluetooth module is connected to the laptop via a small cable with very fine wires - take care not to damage the cable when you pull the module out of the case.

  • Gently lift the Bluetooth module up and over the retaining clip. A plastic spudger may be useful.

  • Disconnect the connector being careful not to damage the fine wires on the cable.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.