Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Alemão
Passo 33
Locate 8x flex cables connected the logic board For each flex cable, pull up on their plastic flap with a pair of tweezers Take the hook end of a Halberd Spudger and gently pry up the retaining flap on the ZIF socket of each cable
Disconnecting More Flex Cables
  • Locate 8x flex cables connected the logic board

  • For each flex cable, pull up on their plastic flap with a pair of tweezers

  • Take the hook end of a Halberd Spudger and gently pry up the retaining flap on the ZIF socket of each cable

  • Make sure to use gentle force as this shouldn't require a lot of force. If excessive force is used, you could break the flex cable.

  • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  • Take your tweezers and pull on the plastic cover to pull each cable away from the ZIF socket to remove the flex cable from it's socket

  • Make sure to use gentle force as this shouldn't require a lot of force. If excessive force is used, you could break the flex cable.

  • If any of the plastic flaps break off don't worry! You can use a combination of your spudger and tweezers to gently pull out the flex cable from it's respective socket

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.