Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Holandês
Passo 7
With the spudger still poking through the hole in the adhesive strip, push the spudger tip into the corresponding hole in the frame of the iMac. Using the hole and spudger to anchor the position of the adhesive strip, line the strip up against the right edge, gently pulling up against the spudger to ensure the strip is taut, and stick it onto the frame. Using the hole and spudger to anchor the position of the adhesive strip, line the strip up against the right edge, gently pulling up against the spudger to ensure the strip is taut, and stick it onto the frame.
  • With the spudger still poking through the hole in the adhesive strip, push the spudger tip into the corresponding hole in the frame of the iMac.

  • Using the hole and spudger to anchor the position of the adhesive strip, line the strip up against the right edge, gently pulling up against the spudger to ensure the strip is taut, and stick it onto the frame.

Met je spudger door het gat in de kleefstrip heen stekend, duw je je spudger in het bijbehorende gat in het frame van de iMac.

Breng de kleefstrip, met behulp van het gat en je spudger, aan op de juiste positie aan de rechterkant. Trek je spudger weg van de kleefstrip, zodat deze op spanning komt te staan en druk deze vervolgens stevig vast in het frame.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.