Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 7

Passo 7
Once all of the adhesive is loosened, lift the battery up from the bottom and swing it out over the left side of the rear case. Be sure not to yank it out, as it is soldered to the logic board. Flip the battery over to straighten its cable and set it down.
  • Once all of the adhesive is loosened, lift the battery up from the bottom and swing it out over the left side of the rear case.

  • Be sure not to yank it out, as it is soldered to the logic board.

  • Flip the battery over to straighten its cable and set it down.

接着剤全体が緩んだら、バッテリーを下部から持ち上げて、ケースの左側を軸に裏返してください。

バッテリーを完全に外さないでください。ロジックボードに半田付けされています。

バッテリーを裏返して、ケーブルをまっすぐに伸ばします。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.