Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 4 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 1

Passo 1
Use the tip of a spudger to push the edges of the I/O board connector straight out of its socket on the logic board. It is recommended to carefully push on both sides of the connector to "walk" it out of its socket. It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.
  • Use the tip of a spudger to push the edges of the I/O board connector straight out of its socket on the logic board.

  • It is recommended to carefully push on both sides of the connector to "walk" it out of its socket.

スパッジャーの先端を使って、ロジックボード上のソケットから出入力ボードコネクタをまっすぐ引き上げて接続を外します。

ソケットから取り出す際にはコネクターの両側を丁寧に押してください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.