Pular para o conteúdo principal
Inglês
Francês
Passo 4
After the screws are removed from the top and bottom, you will find that the entire base is still held down by small clips all around the laptop. I found it easiest to start from the front and work my way around, using a Flathead screwdriver to pry it apart from the palm rest.
  • After the screws are removed from the top and bottom, you will find that the entire base is still held down by small clips all around the laptop.

  • I found it easiest to start from the front and work my way around, using a Flathead screwdriver to pry it apart from the palm rest.

  • The second picture shows the heatsink for the Intel GMA 3000 Graphics chip located on the opposite side of the motherboard to the touchpad. On the top of it is a sticky thermal pad that helps to distribute heat to the base.

  • That thermal pad on the heatsink has a double function, in that it is stuck to the base and would need a little effort to separate them from each other.

Une fois les vis retirées du haut et du bas, vous constaterez que toute la base est toujours maintenue par de petits clips tout autour de l'ordinateur portable.

J'ai trouvé qu'il est plus facile de commencer par l'avant et de continuer en longeant les bords en utilisant un tournevis à tête plate pour le séparer du repose poignet.

La deuxième image montre le dissipateur thermique de la puce graphique Intel GMA 3000 située sur le côté opposé de la carte mère vers pavé tactile. Sur le dessus de trouve un adhésif thermique qui aide à transmettre la chaleur à la base.

Ce pad thermique sur le radiateur a une double fonction, en ce sens il est collé à la base et nécessite un petit effort pour l'en séparé.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.