Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 9 guias que incluem este passo.

Inglês
Francês
Passo 3
Use a T5 Torx driver to remove the following screws securing the left speaker to the upper case:
  • Use a T5 Torx driver to remove the following screws securing the left speaker to the upper case:

  • One black 6.8 mm screw

  • One silver 6.3 mm screw

  • One black 4.9 mm screw

  • The silver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.

Dévissez les vis suivantes, fixant le haut-parleur gauche au boîtier supérieur :

Une vis Torx T5 de 6,8 mm (en haut à droite)

Deux vis Torx T5 de 6,3 mm

Il est possible que la vis dans le coin soit recouverte d'un bloc de mousse. Décollez-le et retirez-le à l'aide d'une pincette.

[* black] RemoveUse a T5 Torx driver to remove the following screws securing the left speaker to the upper case:
[* red] One black 6.8 mm T5 Torx screw (top right)
[* orange] TwoOne silver 6.3 mm T5 Torx screwsscrew
[* yellow] One black 4.9 mm screw

[* icon_note] The cornersilver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.
[* black] RemoveUse a T5 Torx driver to remove the following screws securing the left speaker to the upper case:
[* red] One black 6.8 mm T5 Torx screw (top right)
[* orange] TwoOne silver 6.3 mm T5 Torx screwsscrew
[* yellow] One black 4.9 mm screw

[* icon_note] The cornersilver screw (in the corner) may be covered with a foam pad. If so, use your tweezers to peel it up and remove it.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.