Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 12 guias que incluem este passo.

Inglês
Holandês
Passo 5
Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. Insert an opening pick into the gap. The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
Lift the display slightly
  • Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.

  • Insert an opening pick into the gap.

  • The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.

Trek met een stevige en constante kracht aan de zuignap om zo een kleine opening te creëren tussen het schermpaneel en de achterste behuizing.

Steek een openingsplectrum in de zojuist gecreëerde opening.

De waterdichte lijm die het scherm op z'n plek houdt is erg sterk: het vereist dan ook veel kracht om deze te openen. Als je moeite hebt met het openen, dien dan meer warmte toe en wiebel het scherm omhoog en omlaag om zo de lijm te verzwakken totdat je opening groot genoeg is om je tool in te brengen.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.