Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 6 guias que incluem este passo.

Inglês
Alemão
Passo 5
Pull the wide tape toward the top of the iPad, applying constant force to release it from the antenna cable between it and the speaker. Slide the tip of a spudger through the gap between the wide tape and the antenna cable, to break the adhesive connecting the two. Continue pulling the wide tape until it is no longer covering the antenna cable.
  • Pull the wide tape toward the top of the iPad, applying constant force to release it from the antenna cable between it and the speaker.

  • Slide the tip of a spudger through the gap between the wide tape and the antenna cable, to break the adhesive connecting the two.

  • Continue pulling the wide tape until it is no longer covering the antenna cable.

Ziehe das breite Klebeband gleichmäßig in Richtung der Oberkante des iPads und löse es vom Antennenkabel zwischen ihm und dem Lautsprecher.

Schiebe die Spudgerspitze durch den Spalt zwischen dem breiten Klebeband und dem Antennenkabel und trenne so die Klebeverbindung zwischen den beiden auf.

Ziehe das breite Klebeband weiter ab, bis es nicht mehr am Antennenkabel festklebt.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.