Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Inglês
Alemão
Passo 3
Gently insert the flat end of a spudger underneath the logic board at various points, slowly prying it up from the rear case. Be very careful to pry evenly and avoid bending or stressing the logic board. If it is hard to insert the spudger, reheat the iOpener and reapply it to the back of the iPad. Be very careful to pry evenly and avoid bending or stressing the logic board. If it is hard to insert the spudger, reheat the iOpener and reapply it to the back of the iPad.
  • Gently insert the flat end of a spudger underneath the logic board at various points, slowly prying it up from the rear case.

  • Be very careful to pry evenly and avoid bending or stressing the logic board. If it is hard to insert the spudger, reheat the iOpener and reapply it to the back of the iPad.

Setze das flache Ende des Spudgers vorsichtig an verschiedenen Stellen unter das Logic Board und heble es langsam vom Rückgehäuse weg.

Heble sorgfältig und gleichmäßig. Vermeide es, das Logic Board zu verbiegen oder zu überlasten. Wenn das Einsetzen des Spudgers schwergängig wird, dann erwärme erneut den iOpener und lege ihn auf die Rückseite des iPads.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.