Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Alemão
Passo 5
Slide the opening tool back and forth across the bottom edge of the phone, cutting through the adhesive securing the rear glass panel. Once the adhesive is cut and the gap is wide enough, insert an opening pick into the gap to keep the adhesive from re-bonding. Remove the opening tool. Once the adhesive is cut and the gap is wide enough, insert an opening pick into the gap to keep the adhesive from re-bonding. Remove the opening tool.
  • Slide the opening tool back and forth across the bottom edge of the phone, cutting through the adhesive securing the rear glass panel.

  • Once the adhesive is cut and the gap is wide enough, insert an opening pick into the gap to keep the adhesive from re-bonding. Remove the opening tool.

Lasse das Öffnungswerkzeug an der Unterkante hin und her gleiten, damit die Klebeverbindung der Glasscheibe aufgetrennt wird.

Wenn der Kleber aufgeschnitten und der Spalt breit genug ist, dann setze ein Plektrum in den Spalt hinein, damit sich der Kleber nicht wieder verbinden kann. Entferne das Öffnungswerkzeug.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.