Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 13 guias que incluem este passo.

Inglês
Italiano
Passo 2
Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case. Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel. This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener,  heat gun, or hair dryer.
  • Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case.

  • Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel.

  • This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer.

  • The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.

Tira la ventosa con una trazione decisa e costante e inserisci un plettro di apertura tra il pannello frontale e la cover posteriore.

Questa operazione richiede parecchia forza e pazienza. Se hai dei problemi a eseguirla, cerca di far oscillare la ventosa e lo schermo per indebolire l'adesivo oppure applica del calore con un iOpener, una pistola termica o un asciugacapelli.

Il pannello dello schermo è fragile. Se hai intenzione di riutilizzare il tuo display, assicurati di inserire gli strumenti non più di quanto serva a separare l'adesivo. Inserendoli a maggiore profondità potresti danneggiare il pannello OLED sotto il vetro.

[* black] Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case.
[* icon_caution] Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel.
[* icon_note] This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer.
[* icon_caution] The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.