Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 13 guias que incluem este passo.

Inglês
Espanhol
Passo 2
Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case. Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel. This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener,  heat gun, or hair dryer.
  • Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case.

  • Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel.

  • This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer.

  • The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.

Tira de la ventosa con presión constante y firme e inserta una púa de apertura entre el panel frontal y caja trasera.

Esto requiere una gran cantidad de fuerza y paciencia. Si tienes problemas, mueve la ventosa y pantalla para ablandar el adhesivo o aplicar calor con una pistola de calor, iOpener o secador de pelo.

El panel de visualización es frágil. Si planeas reutilizar su pantalla, ten cuidado de insertar tu herramienta solo lo necesario para separar el adhesivo. Insertar la herramienta más puede dañar el panel OLED debajo del vidrio.

[* black] Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case.
[* icon_caution] Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel.
[* icon_note] This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer.
[* icon_caution] The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.