Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 13 guias que incluem este passo.

Inglês
Alemão
Passo 2
Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case. Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel. This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener,  heat gun, or hair dryer.
  • Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case.

  • Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel.

  • This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer.

  • The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.

Ziehe den Saugheber gleichmäßig und fest hoch und setze ein Plektrum zwischen Frontscheibe und Rückgehäuse ein.

Du brauchst dafür viel Geduld und musst recht kräftig ziehen. Wenn es nicht gut geht, dann rüttele am Saugheber und der Scheibe, damit der Klebstoff geschwächt wird. Du kannst die Scheibe auch mit einem iOpener, einem Heißluftgebläse oder einem Haartrockner erwärmen.

Die Displayscheibe ist zerbrechlich. Wenn du das Display weiterverwenden möchtest, solltest du darauf achten, dass du das Werkzeug zum Auftrennen des Klebers nur soweit wie nötig einführst. Wenn du das Werkzeug zu tief einsteckst, kann das OLED-Panel unter der Glascheibe beschädigt werden.

[* black] Pull up on the suction cup with firm, constant pressure and insert an opening pick between the front panel and rear case.
[* icon_caution] Do not insert the pick deeper than 1.5 mm, or you risk damaging the OLED panel.
[* icon_note] This requires a significant amount of force and patience. If you have trouble, rock the suction cup and screen to weaken the adhesive, or apply heat with an iOpener, heat gun, or hair dryer.
[* icon_caution] The display panel is fragile. If you plan to re-use your display, take care to insert your tool only as far as necessary to separate the adhesive. Inserting the tool any further can damage the OLED panel under the glass.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.