Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 1

Passo 1
Peel up and remove the large rectangular battery board cover, on the edge of the logic board nearest the battery. If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.
  • Peel up and remove the large rectangular battery board cover, on the edge of the logic board nearest the battery.

  • If the cover doesn't peel up easily, apply mild heat with an iOpener, hair dryer, or heat gun to soften the adhesive underneath, and try again.

  • If the cover doesn't seat securely during reassembly, try rotating it 180 degrees. It must be oriented correctly in order for the adhesive pads underneath to contact the board screws.

バッテリー付近のロジックボードの端にある、大きな長方形のバッテリー用ボードカバーを剥がして、取り出します。

カバーが容易に剥がれない場合は、iOpenerやヘアドライヤーもしくはヒートガンを使って接着剤を温めて、この下に留められた接着剤を柔らかくして、再試行してください。

再組み立ての際に、カバーがしっかりと装着しなければ、180度回転させて再施行してください。下の接着パッドがボードのネジに接触するには、正しい方向に装着しなければなりません。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.