Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 42 guias que incluem este passo.

Inglês
Alemão
Passo 24
Be very careful with this step. Take your time and ensure the adhesive is hot and soft, and that you've been through all of the adhesive with an opening pick. Don't be afraid to stop and reheat. At the top of the iPad opposite the home button, you should have a pick lodged into each corner. Twist the picks to lift the glass slightly, separating the last of the adhesive along all four edges.
  • Be very careful with this step. Take your time and ensure the adhesive is hot and soft, and that you've been through all of the adhesive with an opening pick. Don't be afraid to stop and reheat.

  • At the top of the iPad opposite the home button, you should have a pick lodged into each corner. Twist the picks to lift the glass slightly, separating the last of the adhesive along all four edges.

  • If you encounter a significant amount of resistance, stop twisting. Leave the picks in place, reheat, and reapply the iOpener to the problem areas, and run a pick through the sticking point one more time.

Sei bei diesem Schritt sehr vorsichtig. Lasse dir Zeit, versichere dich, dass der Klebstoff heiß und weich ist, und dass du ihn wirklich ganz mit dem Plektrum zerschnitten hast. Halte im Zweifelsfall an und erwärme noch ein Mal.

An der Oberkante des iPad, gegenüber dem Home Button, müssten noch Plektren an jeder Ecke stecken. Verdrehe sie so, dass sich das Glas sich anhebt und alle vier Kanten gelöst werden.

Höre auf zu verdrehen, wenn du stärkeren Widerstand spürst. Lasse die Plektren an ihrem Platz, erwärme den iOpener und wende ihn an den problematischen Stellen erneut an, und schneide dann noch einmal mit dem Plektrum durch.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.