Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Inglês
Japonês
Passo 4
Carefully slide the flat edge of a spudger underneath the flex cable below the microphone. Twist gently to separate the microphone, while being careful not to strain or damage the flex cable. If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel. If the microphone remains difficult to separate, apply more heat.
Pry up the microphone
  • Carefully slide the flat edge of a spudger underneath the flex cable below the microphone.

  • Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.

  • If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel. If the microphone remains difficult to separate, apply more heat.

マイクの下にあるフレックスケーブルの底に開口ピックの先端を差込み、ゆっくりとスライドします。

フレックスケーブルに歪みや損傷を与えないように注意しながら、マイクを分離するようにゆっくりと丁寧にひねります。

必要に応じて、スパッジャーの先端を使ってフロントパネルのノッチ(切り欠き)部分からマイクを取り出します。マイクが外れない場合は、さらに熱を当てて温めてください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.