Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 2 guias que incluem este passo.

Inglês
Japonês
Passo 5
Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module. Gently wiggle and lift to separate the module from its notch in the front panel. It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.
Pry up the proximity sensor
  • Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module.

  • Gently wiggle and lift to separate the module from its notch in the front panel.

  • It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.

フレックスケーブルの下に開口ピックを差込み、近接センサー+フラッドイルミネーターのモジュール下まで左側から右側に向けてピックをスライドします。

フロントパネルのノッチからモジュールを外すため、ゆっくりと左右に揺らして持ち上げます。

スピーカーを作業の邪魔にならない位置で固定したままモジュールを持ち上げると便利です。 作業中、薄いフレックスケーブルを引っ張らないようにご注意ください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.