Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 8 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 1

Passo 1
Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured. Power off your iPhone before beginning disassembly.
Remove the pentalobe screws
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 6.7 mm-long pentalobe screws at the bottom edge of the iPhone.

  • Opening the iPhone will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

  • There's a black rubber gasket just beneath the head on each pentalobe screw. For maximum protection against dust and liquid, check the condition of the gaskets or replace the screws during reassembly.

作業を始める前に、iPhoneバッテリー残量を25%以下まで放電してください。充電したリチウムイオンバッテリーは、アクシデントで穴を開けてしまうと引火したり、爆発する恐れがあります。

解体を始める前に、iPhoneの電源を切ってください。

iPhone下側の底から、2本の6.7 mm長さのペンタローブネジを外します。

iPhoneを開口すると耐水性能を失ってしまいます。次の手順に移る前に、交換用の接着シールを用意してください。シールを交換しないままiPhoneを組み立ててしまうと、液体ダメージを受けてしまうことがあります。

各ペンタローブネジのネジ頭の下に黒いゴム製ガスケットがついています。これは防塵防水性能を最大限に強化するためです。このガスケットのコンディションをチェックしてください。必要であれば、再組立の際にネジを交換してください。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.