Ir para o conteúdo principal
Inglês
Chinês

Traduzindo o passo 9

Passo 9
Apply even pressure over the whole adhesion surface for at least 30 seconds to strengthen the bond. For maximum bond strength on external-facing components (like displays and covers), you can leave the adhesive under pressure overnight.
  • Apply even pressure over the whole adhesion surface for at least 30 seconds to strengthen the bond.

  • For maximum bond strength on external-facing components (like displays and covers), you can leave the adhesive under pressure overnight.

  • Leaving the phone under a stack of books is a good way to do this—just make sure the books apply even pressure to the entire bond. You may need some kind of spacer to allow the books to lay flat.

  • Alternatively, you can use screen vice clamps around the perimeter of your device to set the new adhesive.

在整个粘合表面上施加均匀的压力至少30秒以加强粘合。

为了外部的配件(如显示器和盖板)有最大的粘合强度,你可以在手机表面压上重物一整夜。

将手机放在一堆书下是一个很好的方法 -—— 只要确保书籍施加压力均匀。你可能需要使书籍平放。

或者,你可以使用设备周围的屏幕虎钳固定新粘合剂。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.