Ir para o conteúdo principal
Inglês
Chinês
Passo 7
Before applying any adhesive, make sure your replacement part fits, and that all connectors will connect without putting too much stress on their cables. If it is safe to do so, power on your device and verify that everything functions correctly. If everything works, power off the device and continue. If anything does not function as expected, visit the Answers Forum for troubleshooting advice. With the device powered off, apply the correct adhesive shape for your repair.
Application and Installation
  • Before applying any adhesive, make sure your replacement part fits, and that all connectors will connect without putting too much stress on their cables. If it is safe to do so, power on your device and verify that everything functions correctly. If everything works, power off the device and continue.

  • If anything does not function as expected, visit the Answers Forum for troubleshooting advice.

  • With the device powered off, apply the correct adhesive shape for your repair.

  • Avoid applying adhesive over ribbon cables, or delicate surfaces like NFC or wireless charging coils.

  • When applying adhesive strips, make sure to apply one end first, then use a finger or the flat end of a spudger to smooth the rest of the strip as you lay it down, squeezing out any air bubbles.

  • Use a pair of tweezers to peel the backing off the adhesive.

在使用任何粘合剂之前,请确保你的更换配件是合适的,并且所有接口都可以连接而不会对其电缆施加太大的压力。之后,请打开设备电源并验证一切是否正常。如果一切正常,请关闭设备电源并继续。

如果任何内容无法按预期运行,请访问问题解答论坛以获取故障排除建议。

关闭设备后,请使用正确的粘合剂形状进行维修。

避免在带状电缆或NFC或无线充电线圈等精致表面上涂抹粘合剂。

在使用胶条时,请务必首先涂抹一端,然后用手指或撬棒的扁平端再铺平其余的条带,挤出任何气泡。

使用一把镊子剥离粘合剂的背衬。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.