Traduzindo o passo 15
Step 15

-
Go back to the fuel tank access ports.
-
Remove the electrical connector for the fuel pump.
-
Use a large flat blade screw driver to insert into the tab. Gently push the top of the screw driver toward the wires.
-
Pull up on the connector. If yours is difficult to remove, you can get some extra leverage from a 90° screwdriver as shown.
-
Be sure to release the latch (using the large flat blade screwdriver) before prying up with the 90° screwdriver.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.