Ir para o conteúdo principal
Inglês
Holandês

Traduzindo o passo 2

Passo 2
Put the gimbal bushings (the  rubber balls) back into the plastic alignment mounts. The circle that is separated from the main body of the bushing should then be inserted into the hole. When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.
  • Put the gimbal bushings (the rubber balls) back into the plastic alignment mounts.

  • The circle that is separated from the main body of the bushing should then be inserted into the hole.

  • When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.