Ir para o conteúdo principal

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão todos os 12 guias que incluem este passo.

Inglês
Japonês

Traduzindo o passo 1

Passo 1
Use the tip of a spudger or a fingernail to disconnect the large lower display connector by prying it straight up from its socket. To re-attach press connectors like this one, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.
  • Use the tip of a spudger or a fingernail to disconnect the large lower display connector by prying it straight up from its socket.

  • To re-attach press connectors like this one, press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is even slightly misaligned, the connector can bend, causing permanent damage.

スパッジャーの先端か爪を使用して、ディスプレイ下側にあるコネクタをソケットから外します。

このようなプレスコネクターを再装着するには、片方の端がカチッと音がするまで押し、次に反対側も同様に押します。 中央部分は押さないでください。 コネクタの位置がちょっとでもずれていると、コネクタが曲がってしまい、永久的な損傷を引き起こす可能性があります。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.