Ir para o conteúdo principal
Inglês
Francês

Traduzindo o passo 1

Passo 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.

  • Remove four T10 Torx screws securing the power supply to the rear case.

  • Two fine-thread 7 mm T10 Torx

  • Two coarse-thread 7 mm T10 Torx

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Insira tradução aqui

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.