Ir para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Use flat side of the spudger to get under battery and use pressure to release from glue. Do this all the way around battery until it comes off. At this point do not attempt to fully remove the battery as it is still attached to the logic board. At this point do not attempt to fully remove the battery as it is still attached to the logic board.
    • Use flat side of the spudger to get under battery and use pressure to release from glue. Do this all the way around battery until it comes off.

    • At this point do not attempt to fully remove the battery as it is still attached to the logic board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Robert Clark

Membro desde: 21/01/2015

1.065 Reputação

7 Guias de autoria

Equipe

USF Tampa, Team 5-4, Brown Winter 2015 Membro de USF Tampa, Team 5-4, Brown Winter 2015

USFT-BROWN-W15S5G4

4 Membros

16 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 212