iRobot Roomba 890 Cleaning Head Replacement

Introdução

During the natural use of an iRobot Roomba, the cleaning head may become worn, or damaged. This guide details the tools and equipment needed to replace an iRobot Roomba 890 cleaning head, as well as the steps required to complete the replacement. These steps reverse after the replacement head is installed, follow the steps in reverse order to reassemble the device.

O que você precisa

Passo 1 Cleaning Head

iRobot Roomba 890 Cleaning Head Replacement, Cleaning Head: passo 1, imagem 1 %32

Use a Phillips #2 screwdriver to remove the two 11 mm screws.
Remove the battery cover.

Editar

Passo 2

Remove the battery by pulling directly up on the grey pull tabs.

Editar

Passo 3

Use a Phillips #2 screwdriver to remove the one 7.7 mm screw.
Remove the yellow brush head.

Editar

Passo 4

iRobot Roomba 890 Cleaning Head Replacement: passo 4, imagem 3 %32

Use a Phillips #2 screwdriver to remove the two 11 mm screws.
Lift the baseplate up and off.

Editar

Passo 5

To remove the dust collection bin, press the release button on the top side of the Roomba and pull it straight out.

Editar

Passo 6

iRobot Roomba 890 Cleaning Head Replacement: passo 6, imagem 3 %32

Press the bright yellow tabs inwards and lift up at the same time to expose the cleaning head.
Remove the main brushes by lifting them up and out of the housing.

Editar