Ir para o conteúdo principal

Introdução

The spinning brush on the iRobot Roomba 690 is used to help sweep debris towards the roller brushes. Over time, it may need to be replaced or cleaned. This guide will explain how to replace the spinning brush. Removing the spinning brush is required when accessing components of the Roomba concealed inside the protective bottom cover, and as such performing these steps will be required to complete other guides.

Peças

Nenhum componente especificado.

  1. Place the Roomba upside down so that the wheels and brushes are facing upward.
    • Place the Roomba upside down so that the wheels and brushes are facing upward.

  2. Loosen the captive screw in the spinning brush using a Phillips #0 screwdriver. Remove the spinning brush from the vacuum. Remove the spinning brush from the vacuum.
    • Loosen the captive screw in the spinning brush using a Phillips #0 screwdriver.

    • Remove the spinning brush from the vacuum.

Conclusão

To reassemble your device, follow these instructions in reverse order.

John Galvin

Membro desde: 23/03/2022

557 Reputação

5 Guias de autoria

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 23