Conserte seus objetos

Direito de executar reparos

Loja

iRobot Roomba 551 Brushes Replacement

Escrito Por: John McTigue (e 5 outros contribuidores)
  • Comentários: 3
  • Favoritos: 0

Dificuldade

Fácil

Passos

8

Tempo necessário

5 - 10 minutos

Partes

3

Sinalizadores

1

Featured Student Guide

Guia do aluno destaque

Este guia tem sido o trabalho duro de nossos alunos incríveis e é considerado extremamente bacana pelo equipe da iFixit.

Introdução

This guide explains how to remove the brushes from your iRobot Roomba 551, either for replacement or cleaning.

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

  1. Place your Roomba upside-down on a hard surface.

    • Place your Roomba upside-down on a hard surface.

    Editar

  2. While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    Editar

  3. Gently pull upwards on the brush to remove it.

    • Gently pull upwards on the brush to remove it.

    Editar

  4. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

  5. Rotate the Roomba upside-down so the bottom is facing towards you.

    • Rotate the Roomba upside-down so the bottom is facing towards you.

    Editar

  6. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

    Editar

  7. Carefully lift the bottom plate.

    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

    Editar

  8. Pinch the yellow tabs on the sides of the brush cage and lift up to open. Pinch the yellow tabs on the sides of the brush cage and lift up to open.

    • Pinch the yellow tabs on the sides of the brush cage and lift up to open.

    Editar

  9. Grab each brush and lift upwards to remove. Grab each brush and lift upwards to remove. Grab each brush and lift upwards to remove.

    • Grab each brush and lift upwards to remove.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor

com 5 outros contribuidores

John McTigue

Membro desde: 31/01/2014

331 Reputação

3 Guias de autoria

Emblemas: 8

+5 outros emblemas

Equipe

Cal Poly, Team 13-14, Regan Winter 2014 Membro de Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

4 Membros

19 Guias de autoria

2 comentários

Adicionar um comentário

Should be no need to remove the back plate. Just open the brush cage and lift out the brushes

Gunnar Nybraten - Responder

I did all that, bought a new brush cage and it is still announcing error 2-clean brushes.

Christa Eads - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 24

Duração total: 1,288