Introdução

This is an easy guide. It should only take a few minutes to complete. The only tool required is Phillips #1 Screwdriver.

Peças

Não são necessárias peças.

  1. Lay the Roomba upside down on a flat surface.
    • Lay the Roomba upside down on a flat surface.

    • The edge brush is located near the battery pack.

    Adicionar comentário

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Using the Phillips #1 Screwdriver, unscrew the 7.2 mm Phillips #1 screw while holding the edge brush in place.
    • Using the Phillips #1 Screwdriver, unscrew the 7.2 mm Phillips #1 screw while holding the edge brush in place.

    Adicionar comentário

    • Grab the edge brush and lift it up to remove.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Samantha Barrett

Member since: 13-01-2014

501 reputação

5 Guides authored

Equipe

Cal Poly, Team 17-5, Forte Winter 2014 Membro de Cal Poly, Team 17-5, Forte Winter 2014

CPSU-FORTE-W14S17G5

5 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 323