iPod Shuffle 3rd Generation Rear Case Replacement - Guia de Reparo iFixit

Introdução

Replace the rear case on your iPod shuffle for a shiny new clip.

O que você precisa

Passo 1 Rear Case

iPod Shuffle 3rd Generation Rear Case Replacement, Rear Case: passo 1, imagem 1 %32

Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
Be careful when using a metal spudger, as you may scratch the outer case.

Passo 2

iPod Shuffle 3rd Generation Rear Case Replacement: passo 2, imagem 1 %32

iPod Shuffle 3rd Generation Rear Case Replacement: passo 2, imagem 2 %32

Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

Passo 3

iPod Shuffle 3rd Generation Rear Case Replacement: passo 3, imagem 1 %32

Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.
Pry the rear case away from the front case.

Passo 4

iPod Shuffle 3rd Generation Rear Case Replacement: passo 4, imagem 1 %32

Lift the bottom of the rear case and remove it from the rest of the iPod.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Autor(a)

com 3 outros contribuidores

Matthew Newsom

Membro desde: 01/05/10

39.500 Reputação

Autoria de 67 guias

+44 outros emblemas

0 comentários

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 4

Últimos 30 dias: 19

Duração total: 8,093