Ir para o conteúdo principal

iPhone 6 Plus Power Button Cable Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. iPhone 6 Plus Power Button Cable Replacement, Power Button Cable: passo 1, imagem 1 %32 iPhone 6 Plus Power Button Cable Replacement, Power Button Cable: passo 1, imagem 2 %32
    • Use a pair of tweezers to peel the single adhesive tab that resides on top of both the power button and audio control/rocker switch cable connectors.

  2. iPhone 6 Plus Power Button Cable Replacement: passo 2, imagem 1 %32
    • Remove the single 1.3 mm Phillips #00 screw securing the power button cable bracket to the rear case.

  3. iPhone 6 Plus Power Button Cable Replacement: passo 3, imagem 1 %32
    • Carefully grasp the bracket with a pair of tweezers and remove it from the iPhone.

  4. iPhone 6 Plus Power Button Cable Replacement: passo 4, imagem 1 %32
    • Remove the following screws securing the power button cable bracket to the inner edge of the rear case:

    • One 2.1 mm Phillips #00 screw

    • One 1.7 mm Phillips #00 screw

  5. iPhone 6 Plus Power Button Cable Replacement: passo 5, imagem 1 %32
    • Grasp the metal bracket covering the power button switch with a pair of tweezers and remove it from the iPhone.

  6. iPhone 6 Plus Power Button Cable Replacement: passo 6, imagem 1 %32
    • Remove the single 2.1 mm Phillips #00 screw securing the power button switch to the rear case.

  7. iPhone 6 Plus Power Button Cable Replacement: passo 7, imagem 1 %32
    • Pull the power button switch out of its recess on the rear case with a pair of tweezers.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 173