Ir para o conteúdo principal

iPhone 5 headphone jack for music remote control to wait for headphones

    • Step 1: Carefully loosen the dust in the headphone jack with a soft tool (such as a toothpick) and remove it.

  1. iPhone 5 headphone jack for music remote control to wait for headphones: passo 2, imagem 1 %32
    • Roll a piece of very fine sandpaper (about 1cm x 2cm) into a thin roll and carefully sand the deposits inside the headphone jack. Caution: The round pins that make contact between the jack plug and the headphone jack should not be damaged.

Conclusão

Repeat the steps in order to reassemble your device.

4 outras pessoas executaram este guia.

Um agradecimento especial a esses tradutores:

de en

100%

irlanda está nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

RustyOcean

Membro desde: 10/09/15

118 Reputação

Autoria de 1 guia

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Duração total: 379