Ir para o conteúdo principal

iPhone 5 Volume Controls Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. iPhone 5 Volume Controls Replacement, Volume Controls: passo 1, imagem 1 %32 iPhone 5 Volume Controls Replacement, Volume Controls: passo 1, imagem 2 %32
    • Remove three screws securing the vibrator and vibrator bracket to the rear case:

    • One 2.3 mm Phillips screw

    • One 1.7 mm Phillips screw

    • One 1.6 mm Phillips screw securing the vibrator to the top inside of the rear case.

  2. iPhone 5 Volume Controls Replacement: passo 2, imagem 1 %32
    • Remove the vibrator and vibrator bracket from the rear case.

  3. iPhone 5 Volume Controls Replacement: passo 3, imagem 1 %32
    • Remove the following screws securing the volume button and ringer switch brackets to the side of the rear case:

    • One 1.5 mm Phillips screw

    • Two 1.8 mm Phillips screws

  4. iPhone 5 Volume Controls Replacement: passo 4, imagem 1 %32 iPhone 5 Volume Controls Replacement: passo 4, imagem 2 %32
    • Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case.

    • Remove the ringer switch.

  5. iPhone 5 Volume Controls Replacement: passo 5, imagem 1 %32 iPhone 5 Volume Controls Replacement: passo 5, imagem 2 %32
    • Use a spudger to pry the volume button bracket from the side of the rear case.

    • Remove the volume buttons.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Andrew Optimus Goldheart

Membro desde: 10/17/09

502.749 Reputação

Autoria de 407 guias

Equipe

iFixit Membro de iFixit

Staff

Membros da 135

Autoria de 16.732 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 492