Ir para o conteúdo principal

iPhone 4S Upper Antenna Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. iPhone 4S Upper Antenna Replacement, Upper Antenna: passo 1, imagem 1 %32
    • Remove the 2.4 mm Phillips screw next to the headphone jack.

  2. iPhone 4S Upper Antenna Replacement: passo 2, imagem 1 %32 iPhone 4S Upper Antenna Replacement: passo 2, imagem 2 %32
    • Use the edge of a plastic opening tool to peel the upper antenna off the headphone jack.

    • Use a pair of tweezers to remove the upper antenna from the iPhone.

    • Before reassembly, be sure to clean the metal-to-metal contact point on the upper antenna (not the mating halves of its connector) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 506