Conserte seus objetos Comunidade Loja

iPhone 4S Power button Replacement

Guia arquivado
Este guia é mantido exclusivamente para fins históricos. Use a versão atualizada do guia para executar o reparo.

Introdução

Fix your power button by following the steps in this repair guide.

Note: Steps are based on this guide.

O que você precisa

  1. iPhone 4S Power button Replacement, Rear Panel-Opening the Phone: passo 1, imagem 1 %32

    • *Power off your phone before you start repairing

    • Remove the two small screws next to the dock connector

    Editar

  2. iPhone 4S Power button Replacement, Take the Rear Panel off: passo 2, imagem 1 %32

    • Use both thumbs to push the rear panel toward the top edge of the iPhone.

    Editar

  3. iPhone 4S Power button Replacement: passo 3, imagem 1 %32

    • Carefully pull the rear panel away from the iPhone. Be careful not to break the clips that attach it to the phone.

    Editar

  4. iPhone 4S Power button Replacement: passo 4, imagem 1 %32

    • Remove the two screws securing the battery connector to the logic board

    • detach the battery connector from the socket, then lift the bottom side of the connector and by placing the head of the tool in the middle of the speaker and the metal connector.

    Editar

  5. iPhone 4S Power button Replacement: passo 5, imagem 1 %32

    • Use the head of your tool to carefully pull up the pressure contact which is located underneath the battery.

    • don't rip the battery connector socket on the logic board, this is an essential part of the iPhone connected by four soldered points.

    Editar

  6. iPhone 4S Power button Replacement: passo 6, imagem 1 %32

    • Unscrew the two screws securing the dock connector cable cover.

    • Once completed, Remove the metal dock connector cable cover and place it on a safe area.

    Editar

  7. iPhone 4S Power button Replacement: passo 7, imagem 1 %32

    • Use the head of your tool to remove the dock cable up from its socket on the logic board.

    Editar

  8. iPhone 4S Power button Replacement: passo 8, imagem 1 %32

    • Once pulled up, Peel the dock connector cable off the logic board

    Editar

  10. iPhone 4S Power button Replacement: passo 9, imagem 1 %32

    • Unplug the cellular antenna cable out from under the metal fingers attached to the logic board and place it on the same side as the doc connector cable

    Editar

  11. iPhone 4S Power button Replacement: passo 10, imagem 1 %32

    • Take out four screws securing the cable cover to the logic board (the screws highlighted)

    Editar

  12. iPhone 4S Power button Replacement: passo 11, imagem 1 %32

    • Use the head of your tool to take off the cable cover tabs out of their slots.

    • Once completed, take off the cable cover from its edge nearest the top and remove it and put it in a safe place.

    Editar

  13. iPhone 4S Power button Replacement: passo 12, imagem 1 %32

    • Use the head of your tool to take off the camera connector to the logic board

    • The camera is now safe to remove, put it in a safe place

    Editar

  14. iPhone 4S Power button Replacement: passo 13, imagem 1 %32 iPhone 4S Power button Replacement: passo 13, imagem 2 %32

    • Use a paper clip to eject the sim card and put it in a safe place

    Editar

  15. iPhone 4S Power button Replacement: passo 14, imagem 1 %32

    • Take off the five labeled connectors

    Editar

  16. iPhone 4S Power button Replacement: passo 15, imagem 1 %32

    • Remove the highlighted screw

    Editar

  17. iPhone 4S Power button Replacement: passo 16, imagem 1 %32

    • Pry up the small grounding clip with the head of your tool and then remove it and put it in a safe place

    Editar

  18. iPhone 4S Power button Replacement: passo 17, imagem 1 %32

    • Remove the highlighted screw

    Editar

  19. iPhone 4S Power button Replacement: passo 18, imagem 1 %32

    • Disconnect the wifi connector highlighted with the head of your tool

    Editar

  20. iPhone 4S Power button Replacement: passo 19, imagem 1 %32

    • Peel up the piece of black tape

    • Remove the screw holding in the logic board

    Editar

  21. iPhone 4S Power button Replacement: passo 20, imagem 1 %32

    • Remove the selected screws

    Editar

  22. iPhone 4S Power button Replacement: passo 21, imagem 1 %32

    • Lift the logic board from the side that has the speaker

    • Remove the logic board.

    Editar

  23. iPhone 4S Power button Replacement: passo 22, imagem 1 %32

    • Take out the two screws keeping the lock button in place

    Editar

  24. iPhone 4S Power button Replacement: passo 23, imagem 1 %32

    • Once done, remove the power button with either tweezers or a sharp object

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Miles

Membro desde: 05/26/15

371 Reputação

Autoria de 1 guia

Emblemas: 5

+2 outros emblemas

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 2,411