Introdução

Apple has substituted the two bottom Phillips screws near the dock connector with 5-point "Pentalobular" screws.

This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws.

Ferramentas

Não são necessárias ferramentas.

  1. Before we proceed, let's make sure you have the correct tools for the job.
    • Before we proceed, let's make sure you have the correct tools for the job.

    • iFixit's iPhone 4/4S Liberation Kit includes:

      • One 5-Point Pentalobe screwdriver

      • One #000 Phillips screwdriver

      • Two 3.6 mm "Liberation" Phillips screws

    • Are you ready to break the shackles of hardware oppression and liberate your iPhone? Let's rock!

    Adicionar comentário

  2. Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
    • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card.

    • Both the Phillips and Pentalobe screws are really small. How small? See for yourself (highlighted in the second picture).

    Adicionar comentário

    • Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.

    • Huzzah! Your iPhone is now liberated from those pesky "Pentalobular" screws.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

46 outras pessoas concluíram este guia.

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 6

Últimos 30 dias: 27

Todo: 32,211