Conserte seus objetos Comunidade Loja

iPhone 11 Pro Rear Case Replacement

Introdução

Use this guide to remove all components from the rear case of your iPhone 11 Pro. This guide will show you how to remove speaker, cables, taptic engine, battery, logic board, and button covers so you can replace a dented or bent cover.

O que você precisa

Vídeo de Apresentação

  1. iPhone 11 Pro Rear Case Replacement, Remove the pentalobe screws: passo 1, imagem 1 %32 iPhone 11 Pro Rear Case Replacement, Remove the pentalobe screws: passo 1, imagem 2 %32

    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.7 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

15 outras pessoas executaram este guia.

Autor(a)

com 4 outros contribuidores

Arty

Membro desde: 10/27/19

27.604 Reputação

Autoria de 95 guias

Emblemas: 22

+19 outros emblemas

3 comentários

how much for housing iphone 11 pro ? Thank you

daddy - Responder

If yo buy it from indonesia it only cost you arround $100-$200

izaz adityas -

I ordered a new charging port but it doesn’t seem to include a speaker element on the left side, and the charging connector module above the port. Can those be moved over from the old charging port?

lemonlev - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 7

Últimos 7 dias: 46

Últimos 30 dias: 199

Duração total: 19,461