Ir para o conteúdo principal

Introdução

Prerequisite only guide. Shows how to disconnect the battery for the iPad Pro 9.7".

Peças

Nenhum componente especificado.

  1. Use a Phillips screwdriver to remove the eleven 1.3 mm screws securing the EMI shield.
    • Use a Phillips screwdriver to remove the eleven 1.3 mm screws securing the EMI shield.

  2. Apply a heated iOpener to the EMI shield on the logic board for one minute.
    • Apply a heated iOpener to the EMI shield on the logic board for one minute.

  3. Lift the logic board EMI shield, starting at the edge nearest the top of the iPad. Slowly peel the EMI shield up from the logic board. This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.
    • Lift the logic board EMI shield, starting at the edge nearest the top of the iPad.

    • Slowly peel the EMI shield up from the logic board.

    • This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.

    • Remove the logic board EMI shield.

  4. Use a Phillips driver to remove the 1.7 mm-long screw securing the battery connector.
    • Use a Phillips driver to remove the 1.7 mm-long screw securing the battery connector.

  5. If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield. Squeeze the sharp protrusion with a pair of pliers to flatten it. Repeat the process for all sharp protrusions along the edges of the EMI shield.
    • If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield.

    • Squeeze the sharp protrusion with a pair of pliers to flatten it.

    • Repeat the process for all sharp protrusions along the edges of the EMI shield.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membro desde: 03/01/2018

188.381 Reputação

432 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

145 Membros

17.084 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 103