Ir para o conteúdo principal

iPad Mini CDMA GPS Antenna Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. iPad Mini CDMA GPS Antenna Replacement, GPS Antenna: passo 1, imagem 1 %32
    • Remove the following screws securing the GPS antenna to the rear case:

    • One 2.5 mm Phillips #00

    • Two 1.1 mm Phillips #00

    • One 1.2 mm Phillips #00

  2. iPad Mini CDMA GPS Antenna Replacement: passo 2, imagem 1 %32 iPad Mini CDMA GPS Antenna Replacement: passo 2, imagem 2 %32 iPad Mini CDMA GPS Antenna Replacement: passo 2, imagem 3 %32
    • Use the flat end of a spudger to loosen the foam adhesive holding the GPS antenna to the right speaker.

  3. iPad Mini CDMA GPS Antenna Replacement: passo 3, imagem 1 %32 iPad Mini CDMA GPS Antenna Replacement: passo 3, imagem 2 %32
    • Gently de-route the antenna cable from the bottom right corner of the rear case.

    • Move the antenna out of the way of the right speaker.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 59