Pular para o conteúdo principal

Introdução

Prerequisite only guide for removing the front panel assembly from an iPad Mini 3.

Peças

Nenhum componente especificado.

  1. Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket. Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket.
    • Use the tip of a spudger to lift the digitizer cable connector straight up off of its socket.

  2. Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case. Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.
    • Slide the flat end of a spudger under the battery side of the digitizer board to begin separating it from the rear case.

  3. Lift the digitizer board up to free the last of the adhesive. Lift the digitizer board up to free the last of the adhesive.
    • Lift the digitizer board up to free the last of the adhesive.

  4. Lift and remove the front panel assembly from the iPad.
    • Lift and remove the front panel assembly from the iPad.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Membro desde: 05-02-2015

173.742 reputação

177 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

101 Membros

9.064 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 154