Ir para o conteúdo principal

Introdução

Prereq only.

Peças

Nenhum componente especificado.

  1. Use a set of tweezers to remove any tape covering the front-facing camera cable clips. Use a set of tweezers to remove any tape covering the front-facing camera cable clips.
    • Use a set of tweezers to remove any tape covering the front-facing camera cable clips.

  2. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector. Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector.
    • Use a plastic opening tool to fold the front-facing camera cable clips outward, away from the cable, freeing the cable connector.

  3. Use a plastic opening tool to lift the front-facing camera cable connector straight up off of its socket on the logic board. Be sure to only pry on the connector, not the socket itself.
    • Use a plastic opening tool to lift the front-facing camera cable connector straight up off of its socket on the logic board.

    • Be sure to only pry on the connector, not the socket itself.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Membro desde: 18/10/2012

440.990 Reputação

547 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

137 Membros

16.708 Guias de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 38