Ir para o conteúdo principal

Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. Este passo não foi traduzido. Ajude a traduzi-lo

    : passo 1, imagem 1 %32
    • Disconnect the following connectors from their respective sockets on the logic board:

    • Wi-Fi antenna cable

    • Speaker connector cable.

    • Dock/Lightning connector cable.

    • There may be a piece of black tape covering this connector. Remove it with tweezers.

    • Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

Linha de Chegada

Um comentário

is there a release for the speaker connector? i didn’t release anything and ripped the connections from the logic board off…

kvnplndrs - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 5

Últimos 30 dias: 5

Duração total: 71