Ir para o conteúdo principal

Introdução

Prereq only.

  1. iPad 4 CDMA Logic Board Connectors Replacement, Logic Board Connectors: passo 1, imagem 1 %32
    • Disconnect the following connectors from their respective sockets on the logic board:

    • Wi-Fi antenna cable

    • Speaker connector cable.

    • Dock/Lightning connector cable.

    • There may be a piece of black tape covering this connector. Remove it with tweezers.

    • Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Um comentário

is there a release for the speaker connector? i didn’t release anything and ripped the connections from the logic board off…

kvnplndrs - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 52