Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

iPad 3 Wi-Fi Headphone Jack Cable Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. iPad 3 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: passo 1, imagem 1 %32 iPad 3 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: passo 1, imagem 2 %32 iPad 3 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: passo 1, imagem 3 %32
    • Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

    • Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

  2. iPad 3 Wi-Fi Headphone Jack Cable Replacement: passo 2, imagem 1 %32 iPad 3 Wi-Fi Headphone Jack Cable Replacement: passo 2, imagem 2 %32
    • Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.

    • Pull the headphone jack assembly cable straight out of its socket on the logic board.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 77