Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the four 2.0 mm Phillips screws securing the LCD to the rear case.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Lift the LCD from its long edge closest to the volume buttons and rotate it out of the rear case.
-
Lay the LCD on the front panel as seen in the second picture.
-
Quase terminado!
Linha de Chegada