Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

  1. Remove the power supply cable from its connector by pulling it parallel to the logic board. During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.
    • Remove the power supply cable from its connector by pulling it parallel to the logic board.

    • During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Membro desde: 17/10/2009

458.843 Reputação

410 Guias de autoria

Equipe

iFixit Membro de iFixit

Community

132 Membros

13.022 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 61